§ 414. Road plans.

The plans must show plainly all the following information:

(a)

Plan view with the center line or top of curb profile directly below the plan view.

(b)

Typical cross-section of the road to be constructed.

(c)

The proposed grades shall coincide with datum determined by the USGS or USC&GS, if practicable. A permanent bench mark shall be established in the plat and shown on the plans.

(d)

The location, size and depth of all underground structures used for road drainage within the plat.

(1)

Show location and type of inlets and cleanout points for underground drainage systems.

(2)

Show standard plan for all catch basins, inlets, manholes, etc. This may be done by reference to M.D.S.H. Standard Plans (MH 1-A etc.)

(e)

Show locations and profile of all drains outside of the roadway area that are going to be utilized for roadside drainage.

(f)

The drainage plan may be superimposed on the road plan if this can be done without sacrificing clarity.

(Ord. No. 1978-15, 12-11-78)